Home » Poker » Minecraft sword made of cardboard. How to make a paper sword from Minecraft

Minecraft sword made of cardboard. How to make a paper sword from Minecraft

Even in the game Minecraft you cannot defeat enemies with your bare fists. One of the most effective weapons in the game is the sword. It is usually used in close combat, but this item has other advantages. For example, you can use it while breaking blocks. However, it should be noted that after each blow inflicted by the sword, two units of strength are subtracted from it. Therefore, many people prefer to destroy blocks with a fist, the strength of which is unlimited.

Features of using a sword in Minecraft

Enough large number crafters think strategically, trying to defeat enemies. For example, they create small trenches that can be dug with a sword, and place blocks above them. Thus, they are at the level of the mobs' feet, however, due to the blocks, the mobs cannot strike. This method allows you to destroy an entire army.

This method of using a sword works great when trying to take a structure or treasury. But in the fight against spiders and slugs, this strategy is useless. This is where the sword will act as an effective weapon. To attack, you need to press the left mouse button, and if you want to defend, press the right one.

Before you start creating a sword in Minecraft, let's figure out what materials you can use to create it. In the game, swords can be of five different types:

Diamond sword is the most durable and effective. This weapon can deliver 1562 hits, and two hits are enough to destroy the enemy;
Made of gold - less durable, enough for 33 strikes;
Iron - this type of sword can inflict 250 blows, and the damage from it is 3 hearts;
Stone sword - allows you to hit opponents 132 times;
Wooden sword - 60 hits.

How to make a sword in Minecraft

Now let's see how to craft swords and what we need for this. Let's start with wood, as it requires a minimal amount of resources that are very easy to obtain. To craft such weapons, we use a workbench, a stick and two blocks of boards.

That's it. Now you have a wooden sword ready for battle. Let's start creating a stone one. Here the process is the same, only instead of boards we place stones on the workbench.

As you might guess, we use iron to obtain iron weapons.

The golden sword is one of the most attractive, but at the same time “weak” weapons. To craft such an item you need to use a stick and two gold bars.

Well, finally, the time has come for what to do diamond sword, which is the most durable melee weapon. To do this, we use a stick and two diamond stones.

As we can see, to create any sword a stick is required. This is possibly the most used item in the game.

Thus, we learned how to craft a sword in Minecraft. Now you can feel much more confident when meeting the enemy. This weapon will increase the efficiency of your battles and the extraction of various items.

Graphic services for photo design

The sword has always fascinated both bladed weapon connoisseurs and ordinary amateurs. It was valued as a weapon, decoration, relic or simply an object of art. However, today the use of the sword has become even wider - it has become an integral part of a costume, cosplay, and simply fan paraphernalia. A real sword is an expensive thing and not always available. Plus, using a real sword as part of a costume can be problematic due to its heavy weight or lack of authenticity. There are many schemes for this case and teaching aids(tutorials) on how to make a sword out of paper.

Origami: simplicity and beauty

One of the most popular, but at the same time complex techniques for making a paper sword is the art of origami. This guide took only the basics of origami, so as not to complicate the creation process too much. Depending on the size of the desired weapon, select the desired sheet of paper. This guide is focused on A4 as the standard paper size. Cut the sheet to a square - you should end up with a regular rectangle with equal sides. Multi-colored sides of the paper will allow you to better navigate. In our case, pink is the face, and purple is the back.

The result is not a traditional Asian blade for origami, but a sword quite close to current trends.

You can use black and silver paper to make the sword more realistic.

To make the origami sword, which involves a large number of creases and eliminates mistakes (otherwise it will look unaesthetic), more dense and reliable, we recommend using thickened paper or decorative cardboard. Practice on simple sheets before creating the final version.

For better understanding For the art of origami, you should refer not only to schematic guides, but also to videos. This way you can better understand in what places and how to crease the paper.

Minecraft: DIY legendary blade

The world of Minecraft is not only an original, but also a very attractive gaming space for the eyes. Many cosplayers or just fans want to get their hands on some kind of thing from this game - a kind of artifact that will become part of the fan image. All Minecraft swords are the same in appearance, but it is the diamond one that stands out slightly from the general series with its bright colors. He is the most sought after fan staff among fans of the game. But instead of spending money on a purchase and painfully waiting for the delivery of the treasured toy, you can create such a sword yourself.

This tutorial is designed for a half-meter long (45 cm) sword, which will make it seem very canonical and realistic. Such a blade will easily fit into the hand and can be swung around. You don't need any special skills or craftsmanship here. All it takes is a little care and patience. Print each image shown on glossy photo paper in portrait format, i.e. 20 x 30. This is the standard size of a landscape sheet.

For clarity, let's denote which part each picture represents:

The blade itself.
Side edges of the blade.
The first part of the handle.
The second part of the handle.
Handle side.
Finished diamond blade.

You can print the resulting pictures by cutting them in Photoshop, but if you need a larger size, then carefully redraw them in a program with a larger scale.

These sheets of images should be carefully cut out and folded as shown. Both parts and creases must be glued together with strong glue, which is designed to work with photo paper or thick cardboard.

Other swords: simpler guides

If you are just starting to practice such a unique handicraft, then it will be useful for you to familiarize yourself with the works of those bloggers who have already eaten more than one dog in this matter. For example, the famous Matita has its own channel on a well-known video resource, where it shows how to make collages of various types of weapons from scrap materials. There, this very quirky inventor demonstrates how to create a sword from a popsicle stick and much more. It will be useful for amateurs to familiarize themselves with what unusual application can find the most ordinary things or even garbage.

Sword made of cardboard and tape

Simple tutorials can teach you less confusing ways to create a paper sword. The next blade is made only from paper tubes. To do this, you need to twist 2 tubes of double-sided colored cardboard and secure them in this position. Place the smaller, narrower tube perpendicular to the first one in the place where the handle should be.

Fasten the tubes in this position with black or other tape to match the color of the cardboard, but not transparent - with it the sword will lose its solidity. Sharpen the end of the blade tube by cutting a piece from both sides so that the tip resembles a triangle. Secure with tape. Ready!

Sword from The Lord of the Rings

To make this weapon, you will need not only a standard set of cardboard, scissors and glue, but also phosphorescent paint along with a piece of plastic. First, find a diagram of the sword shape or use any one you like. Print it out and cut it out on cardboard. Repeat the same with the plastic: trace the outline of the sword on it and cut it out. To work you will need polycarbonate plastic.

Fill all the edges with sealant, and then, when it is taken, make a small hole in the sword under the handle - phosphorescent paint is poured there. It will be canonical to use blue, but you can choose any color that you like. Use a syringe or a tube to fill in the paint. Make sure it spreads around the entire perimeter of the blade. Once the paint is poured, cover the hole with tape or a drop of sealant. Hold the sword up to the light. Ready! In the dark it glows amazingly and has a very mystical appearance. Don't forget to paint the handle for more realism.

It is important to make sure that all the sealant is dry before pouring the glow paint. Otherwise, the paint will spill out and the sword will be damaged.

To play with a child interested in knightly battles, or as a theatrical prop, you may need a sword. Of course, a wooden saber or blade looks more impressive, but the process of manufacturing such a weapon will take quite a long time. It is much faster and easier to make a sword from paper or cardboard, especially since playing with it will be much safer for a child.

We glue a three-dimensional sword out of paper

To make a sword out of paper we will need:

thick sheet (preferably whatman paper or cardboard);
glue (it can be replaced with a stapler or tape);
stationery (pencil, scissors and ruler);
colored paper or foil for decorating the finished sword.

Scheme for making paper weapons

Main part. The thicker the paper, the stronger the sword. To prevent the finished product from bending, it must be made in relief; for this, the part on the cut should be diamond-shaped. We fold a rectangular sheet of the desired width and length lengthwise like an accordion to make 8-9 longitudinal strips of equal width. Eight of them fold into each other, and the ninth will serve for fixation. After smearing glue on 4 edges, fold the sheet bend over bend.

Fixing parts. To ensure that the main figure does not unfold and is stronger, it is necessary to make fixing parts. To do this, you should make a drawing as shown in the figure, and the side of the edge of the main part should be equal to the length of the side of the fixing part (a1=a2). You need to make two such diamonds to secure them at both ends of the main workpiece.

The edge of the sword. We make it from a separately prepared pyramid with a rhombus at the base, guided by the drawings. We will glue it to the fixing diamond on one of the sides of the future sword.

We connect the details. We connect the main part of the sword with two diamonds, gluing them on both sides of the workpiece, and the tip with glue.

Sword handle. We wrap a square sheet of paper, the length of the sides of which is 4 * a1 (see Fig. 1), according to the drawings to form a corner. We glue one edge and try it on to the main sword blank, making cuts at the tip of the corner along the fold lines. We wrap the edges outward, and, having smeared them with glue on the inside, we fix them on the main figure.

Decoration. We wrap the blade of the finished sword with foil, carefully wrapping its edges at the tip of the tip. We align the edges and glue the joints. We decorate the hilt of the sword with colored paper or make an applique.

So we made a beautiful three-dimensional sword with our own hands using paper.

How to make a paper sword from Minecraft?

By following the simple instructions presented in the following video, you can make a paper sword from Minecraft in a slightly different way, spending very little time. We assure you that this spectacular three-dimensional paper product, copying the diamond sword from the game, will cause a storm positive emotions both very young and adult Minecraft fans.

We construct a sword using the origami technique

You can also make a sword using the origami technique. For this we need a square sheet of paper.

We alternately bend the sheet first horizontally, then vertically and along both diagonals. We fold the square horizontally, then vertically, after which we get a double square with a diagonal deflection. We bend the side parts of the resulting square towards the middle.

We straighten the folded parts of the figure, and then open the top layer by pulling the bottom corner. Along the inflection lines, fold the sides of the rhombus inward.

Bend the side corners of the rhombus towards the middle of the figure and turn it over reverse side. Fold the corners of the square as shown in the figure.

We place the corners in their initial position, tucking them inward along the lines of the resulting folds.

We turn the part over again. We form the blade of the future sword by folding the side corners of the outermost layer parallel to the axis towards the center, while the corners should align with the axis line. Turn the part over again and fold the wedges towards the center.

Turn the workpiece over and straighten the wedges pressed at the center. By moving the lower corner to the right, we reveal the part. We align the lower part of the resulting triangle with the vertical axis of the part.

Along the fold lines we fold a shape resembling a rabbit ear, put it down and form a similar part on the left side.

To highlight the handle, move the lower corner of the part to the right, bending it along diagonal lines.

Having done similar actions on both sides, we obtain a fence for the handle from the blade of the sword. Turn the part over.

We fold the lower corners of the product towards the center, bend the rays of the fence, bending their ends upward.

The paper samurai sword is ready.

The same sequence of actions for making a samurai sword can be seen in the video:

The simplest diagram of a children's sword made of cardboard

There are very quick way, for which you will need a cardboard sheet, a pencil and scissors.

Draw the outline of the future sword on cardboard in 4 copies.
Cut out the templates and glue them together to make the product thicker.
For decoration, you can use colored paper or felt-tip pens.

Ready! You can start playing pirates!

Ninjato sword like the Teenage Mutant Ninja Turtles

To make a ninja sword out of paper, you need to prepare:

half a sheet of yellow colored paper;
half a sheet of brown colored paper.

We make the product according to the following algorithm:

Fold the yellow sheet in half to determine its middle. After this, straightening the sheet of paper again, fold its sides three times towards the middle deflection. Fold the resulting workpiece in half again.

We make the handle from a brown sheet, which we cut in a ratio of 2:1.

We bend most of the cut at both ends: on the left - up, on the right - inward. The fold width should not exceed 1 cm.

We wrap the previously folded sheet around one of the edges of the yellow blade and glue it together. We also form a handle from the remaining small part of the sheet, twisting it around the opposite edge of the yellow blank.

Cut out a small rectangle from brown paper, 2-3 times the width of the blade. We make a slot and put the blade itself through it. The result is a fence for the hand - a guard.

The ninja sword (ninjato) like Leonardo the turtle is ready!

Hidden cardboard blade for games in the style of Assassin's Creed

The following video will be useful for making props for a children's game of assassins. Using the diagram presented in it, you can easily and quickly make a hidden assassin blade for a child from cardboard, similar to the one used in the computer game Assassin's Creed.

Modern psychologists believe that a person’s mind is also at his fingertips, which is why they recommend creating more crafts with your own hands. Computer games such as Minecraft are of increased interest. It will be useful to break away from the computer, at least for a short time, and make Minecraft out of paper - original figures with your own hands. Such models come out three-dimensional; you can get pleasure from the fact that you can hold this 3D format in your hands.

Modern psychologists believe that a person’s mind is also at his fingertips, which is why they recommend creating more crafts with your own hands.

Minecraft refers to computer games construction theme, where, like a “sandbox,” blocks, cubes, and objects are created and destroyed in a three-dimensional environment. You can create such blocks and objects not only in virtual world, but also in real life, all you need to do is download the diagrams and print them using a printer, and then glue them together.

The paper world consists of the main blocks:

basic building material in the form of boards used for buildings and structures;
foliage used for plants;
diamonds for decorating buildings and structures;
stone blocks for construction;
sand block;
pumpkins, which will be needed to create a Halloween atmosphere;
obsidian, used to build dark structures;
hellish stone and mossy cobblestones;
hostile cube slug and skeleton;
friendly pig block.

In addition to the listed blocks, to create a complete playing field You will need gold ore, grass, wood, glowing stones, a furnace, weapons and many others, depending on the game plan. It’s definitely worth making prints of the characters – mini figurines that will make the paper constructor complete.

Gallery: paper minecraft (25 photos)

Minecraft: big paper house (video)

Minecraft drawings and paper figures: how to make a moving Steve

One of the main characters of the game is Steve, so many people prefer to print and make a figurine of Steve as one of the first. In addition, this character, made according to the scheme, turns out to be moving, which arouses special interest in him.

These men are made in several variations:

action figure of Steve;
Steve in leather armor with a wooden sword;
Steve in diamond armor with a diamond sword.

Making this paper craft is not considered difficult if you follow the detailed instructions.

Ready-made color scans, as well as a stencil, are downloaded and printed in color (if it is not possible to make colored parts right away, you can use the black and white version, which is then colored).
Carefully cut out the parts along the contour and bend them along the fold line.
Glue the finished parts of the paper man together.

One of the main characters paper game ready, you can proceed to other components of the three-dimensional paper kingdom.

DIY Minecraft house: diagram and description

Paper modeling from the field of papercraft necessarily includes making a house. A Minecraft house turns out to be voluminous and also includes things that can be found in any house, including this paper one.

To make a house you will need the following materials:

A4 paper;
PVA glue;
scissors

After the drawings are ready and all the blocks are printed, the toy is assembled sequentially.

The parts are cut out along the contour and folded along the fold line.
Glue the templates along the contour for gluing, and assemble the parts.

After this, you can arrange the house as the player sees fit: combine blocks with each other, arranging furniture in the house, turn it like a fortress to protect it from opponents.

How to make a chest from Minecraft using origami

Known part popular game– it is recommended to make a chest without following templates and printouts, but using paper techniques – origami.

A game without a pirate chest is incomplete, but this part must also be three-dimensional and voluminous; most craftsmen prefer to make a small chest, since the other parts are also not large in size.

To make a chest you will need:

A4 sheet of paper;
colored markers or paints.

A pirate chest can also be made using traditional techniques: scissors, glue, printer, template. But self-production Most players find this origami-style piece much more fun.

The rectangular sheet is folded according to the diagram, not forgetting to tightly iron the fold lines.
You should not deviate from consistency and pattern.
The finished product is colored at your discretion with felt-tip pens, markers or paints.

You can immediately use colored sheets of paper to make a chest: brown, black, yellow. In this case, painting the product will not be required.

Minecraft creeper

The Creeper is also a character in the Minicraft game; without him, the character and style of the entire game will also be incomplete, because this character is made as one of the main ones. According to the game plan, the creeper figurine creeps up to the character and explodes, which is perhaps why this character is one of the most recognizable, especially among children.

To create a popular character, you should stock up on:

A4 sheets – 4 pieces;
scissors;
glue.

You will also need a color printer to print ready-made color templates.

The creeper diagram is printed on 4 A4 sheets.
Cut out the finished parts along the contour, bend all the fold lines at the cutting edge.
The parts are glued together, and the finished figure is allowed to dry.

This character can be made in different sizes by making the template smaller or larger before printing.

For fans game world Minecraft, especially the youngest ones, want to play not only on the computer, but also live, with equally enthusiastic peers. To do this, you can use improvised means to create a sword that is very similar to the game version. The easiest way to make a paper sword.

Volumetric sword with pixels

There are tons of videos showing in detail how to make a sword. But first you need to understand the technique and essence of the work.

For this creativity you will need:

white Whatman paper;
checkered notebook;
ruler;
pencil;
paints;
glue;
scissors.

Although it will take a lot of time to make a Minecraft sword, the result will be worth it.

Now follow the instructions and create your own sword from Minecraft:

We take a sheet of paper in a box from a regular notebook.
We draw a small sword along an oblique line, following the cells.
We shade the handle and blade along the edge.
We outline the project with a colored (red) felt-tip pen.
We take a sheet of Whatman paper, make a drawing and calculations.
Now we transfer all the cells of the details (pixels) in the required quantity to the second sheet of whatman paper, increasing everything in size.
We connect the two sheets with paper clips and cut out the sword blade from the second sheet.
We make corner cuts with stationery scissors along the edge - for folding.
We cut out the handle and process the edge in the same way.
We bend the edges of the paper, creating half the volume, and apply glue to them.
Now we connect the parts of the parts, we get a three-dimensional sword.
On the finished structure, we draw out the cells on an oblique and paint each one in the desired color.
We are waiting for the product to dry, and we are going to surprise others with a brand new, beautiful and absolutely safe weapon.

Such a weapon can be used in role playing games, or give it to a Minecraft lover, or store it on a shelf under glass, creating your own museum of the gaming world.

Sword according to template

There is a second option, how to make a Minecraft sword out of paper. Using templates has always been the easiest and most accessible for fans of the game.

What could be easier than finding the picture you need and printing it using a color printer? The finished cut out parts should be glued onto a cardboard base.

You can be creative - choose a good combination of colors and paint the sword in an original way with acrylic paints or gouache on top of the printout. The metallic color can be imitated with foil. A gilded or wooden sword will look good.

The only drawback may be its small size - A4. For those who want a more substantial toy, the first manufacturing method is suitable.

Video: Paper sword from Minecraft using a printout.

Conclusion

A handmade paper sword is pleasant to hold in your hands. Store-bought plastic cannot be distinguished by this. In addition, the product does not harm the environment, does not cause harm and only brings pleasure to its creator.

The creative process does not take that much time, especially the option with a template. But in the end there will be an excellent addition to the game image and a new toy.