Home » Poker » How to download and run games on PS3. Where can I download licensed games for ps3

How to download and run games on PS3. Where can I download licensed games for ps3

Sony PlayStation 3 is today one of the most popular consoles in the whole world, with more and more new games being released almost every week. Its main feature is that the device itself is sold to consumers almost at cost. Sony makes money mainly from various add-ons, which also include game discs, the cost of which is quite high compared to others. However, the console itself has a rather nice feature that allows you to save games directly on the console. This is why the question “how to install games on PS3” has become so popular.

How to download and how to run games onPS3?

Many people believe that the answer to the question of how to run games on PS3 is to insert the disc into the drive, however, this is not at all true.

Almost immediately after release new console from Sony, smart users have found an excellent way to successfully play their favorite games without overpaying big money to purchase discs and install them on the console’s hard drive - this means downloading games from the Internet and sending them to the console using an ordinary cable. Today, millions of users of the World Wide Web are very successful in exchanging the latest games for Sony PlayStation 3, doing it completely free of charge.

To begin with, you should download the game image from the Internet; this is done quite simply, since specialized sites with similar games you can meet a lot.

After this, we connect the set-top box to the computer using a LAN cable or an ordinary Wi-Fi router.

We hand over the game.

It is immediately worth noting the fact that FlashXP must be installed on the computer. Now let's look at both methods.

onPS3 via cable?

First of all, we connect the console to the computer using an RJ 45 cable through a special connector located on the back wall of the system unit.

On PlayStation 3 as follows:

We go to Internet connections, where we select:

Wired connection method.

Special setting method.

Automatic detection of network device mode.

Setting the IP address must be done manually.

Now on the computer, go to the “Start” menu, then “Control Panel”, here we click “Network and Internet”, where we select view the network status. After the transition, a window will open where on the left you can see the item “Change adapter settings”, click on it.

In the window that appears, click on the required adapter and go to its general settings, then click “Properties”, “Internet Protocol Version 4”, and here we again open “Properties”. Then we indicate the unique IP address of the adapter.

We launch a program called Blackb0x FTP Server in the console.

This program must display the IP address that you entered in the console settings.

It’s immediately worth noting the fact that various IP, DNS and other data may be different for users, so it’s worth checking them out initially before launching games on the PS3. Also, many people prefer to play some games from previous versions of this console. Since it is quite possible to run PS2 games on PS3. Many people do this.

If you don’t know the installation method through the program and how to launch games on PS3, then this is done as follows:

In the program menu, click the “Session” button, and then select “Quick connection”.

We press the connect button, after which we see in the right window the complete structure of all console folders. Now in the left window we find the folder with the game we need and move it to the PS3 section. The location of the game should depend on the readings of the installed Backup Manager.

There is a misconception floating around information resources: forums, websites and blogs that disks with hacked games are suitable for the PlayStation 3 game console. If this trick worked with older generation devices, today they will not have any effect, since developers carefully monitor their profits and prevent the possibility of using unlicensed products. However, cunning users have found a way out of the situation that can still save you from buying expensive exclusives.

“If the mountain does not come to Magomed, then Magomed himself will go to the mountain” - this is exactly how the Greek wisdom sounds, which has come down to our times. Thanks to an extraordinary approach, users were able to discover a vulnerability in the console, which consists of recording games on the internal hard drive of the device, from where the installation of products of interest to you automatically begins. However, how to download games on PS3?

FTP connection

One of the fastest and effective ways data transfer is a direct connection of the console to a personal computer. Of course, you can use a wireless data transmission system, but connecting a cable will ensure not only stable network operation, but also high speed. Considering the weight of modern exclusives, this parameter will be key for you.

After connecting, launch the MultiMAN program and switch to your personal computer. Already on this device it launches an FTP client for data transfer: one of the most optimal options is FileZilla, a favorite of the public and web developers.

When you first launched the MultiMan program, the GAMES folder should have appeared on your game console, located on dev_hdd0. This is where you need to load downloaded games, regardless of size or genre. Please note: the name of the game should not contain Cyrillic letters - only Latin letters!

When the data transfer is complete, restart MultiMAN or press the combination of the “Select” and “L3” buttons on your joystick so that the downloaded game appears in the content list.

External HDD

In this method of data transfer, it is important to verify the file system of the external hard drive. How to do this can be read on the pages of any information resource, so let’s just note that you can only work with FAT32 and no other system. If everything is in order, then you can safely proceed to active action!

For the PlayStation 3, it doesn’t matter what serves as storage for your game: an external hard drive, a flash card or a memory card. The only caveat is that do not use old devices, as they have low bandwidth.

After connecting the device to a personal computer, create a “GAMES” folder on it, where all downloaded games will be downloaded. Please note that the names of folders with games must be exclusively English(more precisely written using Latin characters).

When the data transfer is complete, we go to the game console and connect an external device to it. Next, launch the MultiMAN program and wait for the game library to update. As soon as exclusives appear in the list of updates, you can start playing them. Good luck!

PS3 is the predecessor of the modern PS4 and belongs to the seventh generation of consoles. It is worth giving her credit, despite the fact that gaming market Nowadays it is the fourth “curling iron” that is in greater demand; the popularity of the third has not yet faded. It is still used almost all over the world. Its various functions are likely to help it stay afloat for a long time. You can enjoy watching movies, listening to music, going online and even hanging out on YouTube!

However, the PS3 owes much of its appeal to modern audiences to its exclusives. Of course, now many of them are gradually being transferred to the next generation. However, some still remain loyal to the original console.

Moreover, thanks to some firmware, users can install games on PS3 from a flash drive. How exactly this can be done is described in this article.

Why use a method like this?

Despite all the advantages of the console, its main problem for gamers, especially for those who are residents of the CIS, is the inflated cost of applications. The fact is that for each region (American segment, European segment, Russian segment, Japanese segment, etc.) its own price is set. In our country, licensed copies of games are sold at a fairly high cost. It also depends on the ruble-dollar ratio. If in 2017 the cost in an American store remained practically unchanged, then in a Russian store it noticeably soared.

It is because of this problem that more and more users are interested in how to install games from a flash drive on PS3. And this is not at all surprising. After all, this way you can save a lot of money. Let's say right away that this requires special firmware for your set-top box. However, this issue is not worth thoroughly considering for each gadget. As an example, you can take an already hacked PS3.

Preparing the console

Having mentioned the firmware, it is impossible not to say at least a few words about what it is and where you can get it. Any standard PS3 comes with a factory installation that protects it from piracy. Therefore, almost any manipulation with the flash drive becomes impossible. To do this, you need to install custom firmware, thereby allowing access to external unlicensed media.

Now it can be installed on almost any console. The only version that has not yet received its own upgrade is Super Slim, which was released at the end of the seventh generation.

Having successfully changed the firmware, you can work with external media. Will it now be possible to launch a game on PS3 from a flash drive? Not yet.

Formatting external media

To properly launch a game from a flash drive on PS3, you need to prepare the external media itself for further use. The correct one is very important, because otherwise your set-top box will not be able to read the information correctly.

You can format the flash drive yourself, using a computer or laptop. It is very important to save all the files from your drive somewhere else. They will be deleted after formatting is complete. File system should be called FAT32.

Once you're done with this (formatting instructions can be found in free access), create a folder on a blank flash drive. It should be called Games. This is where you will need to drop all the files that you will download a little later.

Now it’s worth considering how to install the game on a flash drive so that the console can see it. To do this, download the file as usual, using any torrent convenient for you. Then check everything you downloaded. The folders with the names PS3_GAME and Usrdir are important for you. If they are not inside, it means that this distribution is not suitable for further use. It is also worth paying attention to the fact that the names do not contain the Russian alphabet.

On a FAT32 system, there is a limit for writing files - only four gigabytes. The Split4GB program should help you record files that exceed these dimensions.

Launching and installing files

Now let's look at the procedure for installing games on PS3 from a flash drive. If all the instructions above have been strictly followed, then the next step is to launch the Multiman program. It will open all files recorded on the flash drive and help recognize them.

Also make sure to download the following programs to the drive in advance: Blackb0xFTP, OpenManager and TotalCommander. They will need to be copied to the PS3, after which we will be able to install unlicensed files.

Summing up

Now you know the algorithm for installing games from a flash drive on PS3. The protection system for consoles is constantly being improved and complicated. However, this is not the case with the PlayStation 3. Almost all versions were hacked by hackers. Of course, don't forget about Super Slim. It is recommended to bypass it for now and choose a console that came out a little earlier.

When the time comes to buy a brand new PlayStation 3, many questions begin to arise about using this game console. Despite the fact that a new generation of game consoles has been released, the 3rd series has not been forgotten and continues to develop. Therefore, if you are planning to buy a PlayStation 3, then you should first read our article, which will reveal some elements that interest you even before purchasing the console. And today we will consider the question of how to run games on PS3. Yes, the question has a fairly simple basis, but at the same time it is quite complex. The thing is that there are pirated and licensed games, and each of them has its own run instruction.

Launching the game on PS 3

How to run games on PS3? This question may arise when you find yourself with licensed and pirated game discs. With licensed copies everything is quite simple, you insert the disc and start playing. The fact is that each game has auto-start, so you can immediately dive into the adventure. If there is no autorun, then just click on the Start button and the game will start. Regarding pirated games, we note that for them you need to install special firmware on the console. This can be done in specialized stores, and you can also try to do it yourself, however, you should take into account in advance that knowledge of the structure of the console will be required, since it will have to be disassembled. After installing the firmware, you can safely play any games that will launch automatically.

Installing games on PS3

So, we figured out how to run games on PS3, now it’s time to figure out the possibility of installing them. Licensed discs will again not cause us problems, since they can be safely and automatically installed on your hard drive. But how to install pirated games on PS3? Here you will have to work hard. First, you should flash your game console, and then find a device called “jailbreak” (you can buy it at any store that sells game consoles). And that's not all, after creating the basics you need to find and download the programs:

Blackb0x FTP.
Open Manager.
Total Commander.

After you have found them, you should download the files to the USB flash drive and install the programs on the console. Next, you should go to YouTube and find video instructions on setting up the FTP protocol, which will allow you to bypass the console’s protection and install pirated disks. There are over 20 ways to configure the FTP protocol for data transfer and bypass security settings. Each of them is the right remedy to solve the problem.

Playing PS 2 games on a PS 3 console

And the last point that concerns the question of how to run games on the PS3 is to consider the possibility of launching games of the previous generation PS 2. It’s worth warning right away that this procedure is quite complicated, and if you are not confident in your abilities and do not want to simply delve into subsoil system settings, then it's best to avoid it. Although no one bothers you to call a specialist for help, who will set everything up for you without any problems. Once again, you will need a gaming console that will have the firmware latest version. This is necessary, since the firmware is the basis for any manipulations with pirated versions games. If your console is flashed, first download an image of the PS 2 game you want to run. The image must be in "pkg" format. After this you need to download the list of programs:

PS 2 Classic Manager.
PS 2 Classic Placeholder.
reActPSN (latest version).

Then you need to install all these programs on your gaming console. This is done using a regular flash drive and the installation process. After this, you need to create a second profile under the name “aa (English letters)” and activate it. Then, in the created profile, you need to run the reActPSN program - this will create an image of the base for PS 2 games. After these steps, you need to go back to your original profile and create memory cards, this is done in a special function of the game console. You need to create two memory cards with the names: “MK 1” and “MK 2”. And the final moment will be the launch of the PS 2 game image itself, which should be on your flash drive. Now you know how to run PS2 games on PS3, it’s better to make yourself a reminder of this whole process, since if you miss even the smallest detail, you can lose the expected result.

Are there other ways to solve this issue?

In fact, the topic related to the PS 3 game console is already so developed that it has more than 100 different installation methods, launches, hacks, etc. The electronic world does not stand still and is constantly evolving, but despite the fact that developers create new game consoles and security systems, they are constantly hacked and begin to be used for their own purposes. If you want to study this topic widely, then you should take it seriously and start actively studying Internet resources, and if you just want to try, then our recommendations are perfect for this.

Instructions

To be able to install games on the PlayStation 3, you must first use a special software. Format the flash drive by selecting FAT32 format in the settings. Download the Open Manager and BlackBox FTP programs, unzip them, and copy the resulting files to a prepared flash drive.

Unplug your PS3 (also turn off the switch if there is one), and then put the console into JailBrake mode. Insert the flash drive into the USB connector, and then press the start button. Click on “Eject” (the button designed to eject the disc). Go to the “Install Package” menu and find files there for installing previously downloaded applications. Use the "X" button to install them one by one. Then go to the Game menu and see if the corresponding shortcuts for this software appear. Take out the flash drive.

Install Total Commander (if you don't already have it). Connect your console to your home computer using a patch cord. To install games on your PS3, go to the Settings menu and then select Your Network Settings. Next, find the “Connection Settings” item, select “Special” in the “Setting Method” column. Then in the “Connection method” column, click “Wired”, and in the “Device mode” column - “Detect automatically”. Open the IP settings and check the box next to “Manual”.

Set up connections using the address 192.168.1.2. Then find the “Subnet mask” column and set the value to 255.255.255.0. In the “Primary DNS” and “Default Router” columns, set 192.168.1.1, and do not change the additional DNS. Do not use a proxy server, set the MTU field to “Automatic”, for UPnP use the “Enable” mode. Save the settings using the "X" key.

In the "Game" section, find the BlackBox FTP program. Then open Total Commander on your computer, click “Network”, and then click on “Connect to FTP Server”. To install the game on PS3, click “Add”, in the “Connection name” field write “PlayStation 3”, for the server set IP 192.168.1.2:21, and the password field and account don't change. Connect to the selected connection.

A menu will appear in front of you in which you need to select the dev_hdd0 directory. Go to the Game menu and then OMAN46756. In this directory, create a folder GAMEZ, and then copy the game you want to install there. Once the copying process is complete, exit the BlackBox FTP program and launch Open Manager. The question will pop up in front of you: “Use OMAN46756.” Click Yes. Select the desired game and press "X". After this, the installation will begin, and after a while you can enjoy the game.