How to craft a repeater in Minecraft 1.8. What does a repeater do in minecraft
A repeater (or repeater) is a special, “three-element” block of red stone structures. If a regular red dust line requires a delay, signal boost, or "relay" function, then players use it in the design.
Crafting such an element is simple - you need to get three blocks of stone (with an enchanted pickaxe or by firing cobblestones in a stove), place them in the bottom row of the crafting window of the workbench, and place a red torch in the two outer cells of the middle row. The middle of this row will be complemented by a particle of red dust.
The repeater is installed on the blocks in a piston-like pattern - the lower (back) side faces the player. This is convenient when the line is drawn directly under the player’s feet. A repeater is primarily used as a “signal extender.” A normal signal is not transmitted over a bare cable to more than 15 blocks. Installing a repeater increases the length by another 15 blocks - the function of a red torch is performed. Secondly, the delay that many players make, for example, on short circuits in farms, is also often used. The repeater positions can be changed with the right mouse button, increasing the delay by 0.1 s. Placing several repeaters in a row sums up their delays into one. Thirdly, a repeater can also act as an insulated wire - an active signal supplied from the side will not pass through the repeater, so small circuits are often built only from repeaters - in order to be able to run lines on two adjacent blocks without shorting.
Video guide:
The minds and hearts of avid gamers were captured by the brainchild of Markus Persson, a programmer from Sweden. The popular game Minecraft offers players a world in which many items can be created themselves using existing resources. One such item is a redstone block called a repeater. Why do you need a repeater in Minecraft: firstly, this block allows you to conduct electrical signals after a certain time period. Secondly, the repeater can amplify these signals, or, conversely, delay them if a delay has been previously set. Speaking in simple language, if during the game a stripe of red dust was made, then approximately in its center you need to place the created repeater block.
As a result of this manipulation, the mechanism located at the end of such a wire will begin to work slower, and slower for a predetermined time interval. In Minecraft, this interval can be from 0.1 to 0.4 seconds. In general, a repeater is a very useful and multifunctional item in the world of Minecraft. Detailed description its functions can be an excellent explanation of why there is a repeater in Minecraft. So, the first function of this red stone block is already contained in its name. The fact is that in the world of the Minecraft game, an electrical signal can be transmitted through wires made of red dust only on a limited number of blocks. The number of blocks cannot exceed fifteen.
The repeater is designed to get around this limitation in the game: installing it on the fifteenth block allows you to “update” the signal and carry it further, again to a maximum of the fifteenth. IN earlier versions this popular game, when repeaters had not yet been introduced by the developers, special NOT gates were used for a similar purpose. The second important function of repeaters in Minecraft is the ability to block the passage of a signal in the other direction. The red stone can only receive a signal from the block behind it. We are talking about the side closest to the player. And the signal can be transmitted further only to the block located in front of the repeater.
Thus, the red repeater cannot interact with the blocks that are around it, and this point can also be used - the repeater becomes analogous to an insulated wire. This feature is very useful for those players who want to create a fairly compact circuit. When a repeater has been crafted in Minecraft, in front of the red stone at the entrance to activate it (in other words, turn it on), you need to install one of the following objects: – a section of wire made of red dust; – switch (suitable for any type); – red torch; – another red repeater (it must be facing the first input); – a block (which receives power, no matter how). An activated repeater is capable of “launching” objects that are located by the player at its output.
Such objects can be, for example, blocks that are capable of conducting electrical signals, or a section of wire (red dust). The repeater includes another identical block of red stone, facing it with an entrance. Obviously, any mechanism that is controlled by redstone, installed at the repeater output, will also be turned on. The third function that explains why a repeater is needed in minecraft is to delay signals. The red stone does not transmit an electrical signal instantly, but after a certain period of time. To set the desired time interval, you need to right-click on the repeater. The game requires minor adjustment - from 0.1 to 0.4 seconds.
If the player needs a longer signal delay, then for this purpose it is necessary to install several red repeaters in series one after another. So the repeater is very useful thing in creating your own world Minecraft game. How to get a red stone? In general, crafting a repeater in minecraft is available to any player. As with any other crafting of items, certain ingredients are required: red dust, stone and a red torch. In a 3x3 crafting grid, they need to be arranged as follows: three blocks of stones in the three lower cells (right, middle and bottom); in the middle cell there is red dust, and to the left and right of it there are red torches, one on each side. It should be noted that in early versions of the game, players used a pair of red torches as repeaters.
This option may still be relevant now, but repeaters in the form of red stones are now more preferable and, moreover, are very compact. Undoubtedly, information on minecraft, what a repeater is needed for and how to create it are very useful for players just starting to get acquainted with the world of this game. However, some secrets on this topic will be of interest to experienced users. For example, it is useful to know that the vast majority of devices in the world of Minecraft, be they mechanical or automatic, simply cannot be created without the use of red repeaters. By the way, they can be blocked by bringing another red repeater to any side, which is in an activated state at that time.
This is done for the purpose of keeping the electrical signal at the output in a “frozen” state. When this happens, a Bedrock rod appears instead of the rear red flare on the repeater that was blocked. Moreover, a thin rod appears across the direction of the electrical signal. In the early Minecraft versions There was no such interesting opportunity to block the red stone. It appeared in version 12w42a (1.4). The texture of the repeater was also changed there. During the game, it may happen that an arrow hits the red repeater. If it works in a pulse generator, the moment the arrow hits the player will hear a characteristic sound similar to strumming. And the weapon itself will stand vertically for a certain period of time and will not disappear.
Having developed into virtual reality to a sufficient extent and having access to the redstone energy, which in the original Minecraft is emitted by a red torch or a block of red stone, you will be able to create not only static objects or simple tools, but also very complex mechanisms. The variety of their designs and purposes depends on the breadth of your imagination and its creative power.
When creating redstone circuits, you will need a repeater. It has several purposes, and the main one is the continuation of the energy signal. A red lantern and a redstone block transmit energy through red dust wires over a distance of 15 blocks. When you need to achieve a longer chain length, just put a repeater at the end of the wire, and it will increase the signal by another 15 blocks. For example, if you want to illuminate city streets with lanterns, then several repeaters will help you connect many lamps to one energy source at once.
When creating complex circuits, the repeater acts as a diode. It is used if there is a task to prevent the energy of different wire flows from mixing at the points of their contact. This is achieved due to the repeater’s peculiarity when processing the signal - it receives it from only one side and transmits it only in one direction.
Repeaters are also used as timers to delay the signal. One repeater creates a break in energy transmission lasting from 0.1 to 0.4 seconds. When you need to achieve longer delay, install several repeaters one after another. The resulting timer will be useful in creating impressive illumination: with due diligence, you can equip your house with flickering lighting, and city streets with festive garlands. A more practical use of delay is to build mob traps. First, the monster walks along the pressure plate, and the kill mechanism activation signal is triggered when the mob is in a suitable position.
How to make a repeater in Minecraft
If you have approached the process of creating a repeater, it means that you already have valuable material in stock - red dust. It crafts two red torches. And by firing cobblestones, three stone blocks are made. This is what the repeater recipe looks like in the picture:
We will continue our review of the possibilities for creating other devices in the next article. It will talk about the distributor block.
For a beginner starting to master MyCraft, it is unlikely that a repeater will be needed. It is necessary for those who create circuits from redstone and know about the functions that the repeater performs.
The repeater is a multifunctional device. One of the elementary functions is the repetition of redstone signals. On its own, it only transmits a signal for 15 blocks. And if there is a need to create a large trap for mobs or a long automatic farm, then what to do in such situations? In such cases, you cannot do without a repeater, just as it is difficult to do without a good skin in Minecraft - you can easily find the best skins on the website skinscraft.com.
The indicator also functions as a diode. This function is useful for creating complex circuits. Redstone tracks can be laid in parallel and they will not interact with each other. This property will save resources and space when organizing circuits.
Among other things, the repeater delays the signal. The delay can be set between 0.1 and 0.4 seconds. If there is a need to increase the signal delay, then you need to place several repeaters at the same time.
Now about the main thing, to create a repeater you need to burn three cobblestones in the stove, so we will get a stone block. Next, you need to find three units of redstone, from 2 red torches, and place them on the workbench so that there is a stone at the bottom, a red torch in the middle cells on the right and left, and the remaining redstone in the center.
To begin making a red repeater, it is necessary that in your arsenal the player should have such parts as a red torch and dust, as well as a stone. With the help of these elements you will be able, perhaps not the first time, but still, to make a red repeater, which is a type of solid block.
Using a Repeater
Once you have succeeded in making a repeater in Minecraft, consider how it will be useful to you in the game, since this element can be used for several purposes. In particular, the repeater has the property of updating the received signal and transmitting it further. Let us remind you that the signal can be transmitted over no more than 15 blocks. With the help of a repeater, you can transmit a signal through wires to 30 blocks, that is, it expands your signal transmission capabilities as a player by another 15 blocks.
The repeater can also be used as a diode, and also as an insulated wire. The signal can only be received by the repeater from the unit located at the rear. The repeater can transmit the signal exclusively to the block located in front of it. These properties of the element can be used to create an obstacle that will not allow a signal to pass through the wire in the opposite direction.
Many experienced players who learned how to make a repeater in Minecraft immediately after it appeared in the game use this element as an insulated version of a regular wire. In principle, when building compact circuits, you can successfully use this repeater function, since it does not have the ability to interact with neighboring blocks of a different type, regardless of their origin.
Techniques for use
If you place certain objects at the repeater input, they can activate it. Such elements of the Minecraft game include another repeater, whose front panel faces the element that requires activation. The activator can be a red torch and any of the switches offered in the game, a section of wire and a block that must first be powered in any way.
Please note that after you have succeeded in making a repeater in Minecraft, you can use it to activate many game elements that must first be placed at its entrance. Using a repeater, a section of wire made of red dust and any mechanism controlled by a red stone are activated. The activator is a repeater for another repeater facing its input, any block that conducts electricity.
The repeater can be used as a delay element, for which you need to click on its RMB. The delay value varies from 0.1 to 0.4 seconds. If a longer delay is required, then several repeaters are used, installed in strict sequence, one to one.