Home » Checkers » Why doesn't Skyrim turn on? Solutions to various problems, bugs and errors in The Elder Scrolls V: Skyrim Special Edition

Why doesn't Skyrim turn on? Solutions to various problems, bugs and errors in The Elder Scrolls V: Skyrim Special Edition

Cult game The Elder Scrolls V: Skyrim, released back in 2011, is back again! Five years later, Bethesda decided to release a re-release for everyone's favorite Skyrim. For original game At one time, a huge number of patches were released. As a result, everyone expected that it will come out obscenely polished. However, everything turned out wrong.

Players have encountered an impressive list of problems: the game will not launch, the inability to find INI files, the game freezes on the loading screen, crashes on startup, low FPS and a black screen.

In this article we will analyze all these problems and try to solve them. However, before you start, check out system requirements To It’s worth doing this because the requirements for the game have increased significantly compared to the original version.

CPU: Intel i5-750/AMD Phenom II X4-945
RAM: 8 GB
Video card: NVIDIA GTX 470 1GB /AMD HD 7870 2GB

OS: Windows 7/8.1/10 (64-bit version)
CPU: Intel i5-2400/AMD FX-8320
RAM: 8 GB
Video card: NVIDIA GTX 780 3GB /AMD R9 290 4GB
Hard drive: 12 GB free space

Now let's move on to solving problems and errors.

Solutions to various problems, bugs and errors in The Elder Scrolls V: Skyrim Special Edition

Black screen in The Elder Scrolls V: Skyrim Special Edition

Be sure to make sure you have the latest drivers for your video card. Even though this is a re-release old game, but for video cards, most likely, specially optimized drivers had already been released by this time. Go to the official website of your video card manufacturer and download the latest drivers from there. You can use these links:

http://www.nvidia.ru/Download/index.aspx?lang=ru - for cards from NVIDIA.

http://support.amd.com/ru-ru/download - for cards from AMD.

The Elder Scrolls V: Skyrim Special Edition won't launch

Most often, in this case, a simple check of the game cache via Steam helps. To do this, do the following:

Go to your game library on Steam.
Find the Skyrim re-release, right-click on it and go to "Properties".
Go to the tab "Local files" and select "Check cache integrity."
Wait for the process to complete. If any damaged or missing files are found, Steam will download them again.

I can't find INI files in The Elder Scrolls V: Skyrim Special Edition

Unfortunately, at the moment it is really worth attention there are no solutions. However, you can try to restart the game again, but only with the antivirus already disabled. There is a possibility that it might have blocked some files for some reason.

The Elder Scrolls V: Skyrim Special Edition freezes on loading screen

As already mentioned in the first point, make sure that you have updated your video card drivers.

You can also try running the game as Administrator. This may have helped some players.

Skyrim Special Edition

Troubleshooting FAQ

Update video drivers, DirectX and Windows:
NVIDIA Drivers: www.nvidia.com/Download/index.aspx?lang=en-us
AMD Drivers: http://support.amd.com/en-us/download
DirectX Updates: https://support.microsoft.com/en-us/kb/179113
Windows updates will download automatically if enabled.

Back up your files from time to time Skyrim saves(they are located at "C:\Users\*UserName*\Documents\My Games\Skyrim Special Edition\Saves").

Skyrim Special Edition requires the following software:
- DirectX 11
- .NET Framework 4.6
- Visual Studio C++ 2015 Redistributable (x86 and x64 editions).

List of things to check to prevent/solve problems with the game:
- Disable antivirus
- Update your operating system
- Update the .NET Framework to version 4.6
- Update DirectX
- Update your video card drivers
- Update your sound card drivers
- Skyrim SE must be installed on the C:\ drive and cannot be located on an external drive or drive with a different drive letter
- If you already have problems, try running Skyrim SE without mods (if any)
- Make sure that both ini files are in the "\My Games\Skyrim Special Edition\" folder and that they are not empty
- Launch the launcher (SkyrimSELauncher.exe)
- Set the screen refresh rate to 60 Hz (note that V-sync must be enabled and GSYNC disabled)
- Disconnect graphics tablets and any external drives (at least to check)
- Make sure Visual Studio C++ 2015 Redistributable x86 and x64 is installed correctly
- Install the Windows patches listed below
- If everything is bad with VC C++ 2015, try running a file scan from the command line with admin rights: "sfc /scannow"
- If Skyrim crashes, try disabling "Give priority to exclusive mode applications" in the default audio device settings and set the audio format to "16 bit 44100 Hz"
- If Skyrim crashes every 15 minutes or so, disable the touch keyboard and handwriting panel service
- If Skyrim starts but is slow or flickering/blinking, or the game physics are going crazy, check that the integrated graphics card is not selected (you can check in the graphics adapter control panel)
- Vertical sync must be enabled (60Hz) and G-Sync disabled - this is important.

The launcher sometimes incorrectly determines system performance and may set incorrect settings.

The game crashes/freezes without mods.
- Welcome to the world of games from Bethesda Game Studios!

The mouse or keyboard does not work.
- Disable the gamepad.
- Disconnect the USB microphone, webcam or whatever you connected to yourself, this may help.

Problems with animation or the cart at the beginning of the game takes on a life of its own.
- Vert. sync (60 Hz) must be enabled!
- Open \Documents\My Games\Skyrim Special Edition\SkyrimPrefs.ini and set the iVsyncpresentinterval value to 0 if you are using a system with G-Sync. This can also be done in the Skyrim SE settings in the GPU control panel (nvdia and ati).

I stopped receiving achievements.
- When using mods or an old save that was made while playing with mods, achievements will be disabled.
- This can be fixed using a mod: Achievements Mods Enabler / .

Trees and other objects have some gray spots.
- Set the 3D image quality to high in the GPU control panel.

Double cursor when minimizing the game.
- Try to put a neof. patch for Skyrim SE - ENG / .

The save cannot be loaded because it is out of date.
- This can happen if the save is corrupted or conflicting mods are installed.

I'm trying to run SKSE on Skyrim SE, but it's not working.
- A new SKSE64 is being developed for Skyrim SE, release dates are unknown. The old one won't work.

Skyrim is terribly slow, fps is nowhere lower!
- You need to make sure that the game does NOT use the built-in video card. Usually this problem can occur with Nvidia. You can check the settings in the GPU control panel (it seems that we are talking about laptops).
- Disable G-Sync if it is enabled.

The game crashes on AMD RX-- series video cards.
- If updating the video driver does not help, lower the GPU frequency to 1115mhz.

Skyrim SE keeps crashing.
- If you play with mods, make sure they don't use scripts or depend on mods that use scripts.
- The order in which plugins are loaded is very important; incorrect loading order can cause crashes.
- Changing the language helps some players. You can change the language in Skyrim.ini. Also try changing your OS language to one of the languages listed on the Skyrim SE Steam page.
- If Skyrim won't start or crashes on startup, try restarting your computer. It is also useful to restart your computer before installing VC++ 2015 Redist.
- Try activating triple buffering in the nvidia control panel.
- Try setting real-time priority for SkyrimSE.exe in Windows 10. This can be done through the task manager.

Skyrim SE keeps freezing shortly after loading!
- Disable your antivirus (especially Avast), this may help.

Skyrim SE won't start / black screen.
- If you don’t use mods and the game still won’t start, try setting the files “skyrimSE.exe” and “skyrimSELauncher.exe” in the properties in the “Compatibility” tab to run as administrator and compatibility mode with Windows 7.
- Change in Skyrim settings full screen mode for window without frame. This helps some people.
- Change the preferred video adapter for Skyrim SE from integrated to high-performance in the GPU control panel.

The launcher crashes or freezes.
- Set the files "skyrimSE.exe" and "skyrimSELauncher.exe" in the properties in the "Compatibility" tab to run as administrator and compatibility mode with Windows 7.
- Delete both .exe files in the Skyrim folder and check the integrity of the game via Steam so that it downloads them again.

Doesn't go past the logo screen.
- Incorrect loading order of plugins. You need to change it to the correct one.
- Set the screen refresh rate to 60 Hz.
- Delete both ini files in "\My Games\Skyrim Special Edition\".

I want to play Skyrim SE in ultrawide mode.
- Add the following lines to "\Documents\My Games\Skyrim Special Edition\Skyrim.ini":

SIntroSequence=1
and then in the SkyrimPrefs.ini file change the settings to the following values:
bBorderless=0
bFull Screen=1
iSize H=1440
iSize W=3440

I can't reassign any keys!
- Perhaps disabling the gamepad in the options will help.

Error 0x000007b / VC_redist errors / "The program can"t start because api-ms-win-crt-runtime-(1-1-0.dll is missing from you computer"
- These errors occur when something went wrong with the installation of Visual Studio C++ 2015. You need to remove both packages, x64 and x86, then install them again by downloading them from the site Microsoft. When installing these packages, you should disable your antivirus.
- Install all Windows updates and make sure that KB2919355 and/or KB2999226 are installed (you can find it on the Microsoft website).
- If the error is still present, try reinstalling VC++2015 from "\Skyrim Special Edition\_CommonRedist\vcredist\2015".

Error 0xc0000005.
- It looks like there is a registry error or a problem with the video driver. You can try reinstalling the video driver and cleaning/fixing the registry using appropriate programs.

Problems with the introductory quest in Helgen.
- As a temporary solution, install the mod: Alternate Start / .
- Try to turn off the neof. patch until the end of the introductory task.

Skyrim constantly overwrites graphics settings.
- You can try setting both ini files to the address "\My Games\Skyrim Special Edition" in the properties as "read only".

Skyrim won't load, it just hangs in processes.
- This happens if a mod with a bsa archive for regular Skyrim was installed. Skyrim SE uses a new bsa packaging method, so older mods must be converted properly.

Clicking the "Play" button in the launcher restarts the launcher.
- There is no exact solution. Try deleting both .exe files in the Skyrim folder and checking the integrity of the game through Steam so that it downloads them again.

The water is gone!
- EXPERIMENTAL SOLUTION. Add the following lines to Skyrim.ini:
bUseCubeMapReflections=1
fCubeMapRefreshRate=0.0000

I was shot in slow motion during a battle.
- Kill all enemies nearby and wait 1 hour using the wait menu.
- You can try to turn off the neof. patch, if installed.

Problems with saving.
- Disable Bitdefender or antivirus software. Skyrim may be mistakenly identified as a virus. You can also add Skyrim to the antivirus exclusion list.

Textures in Russian are missing and there is a problem with the font in the console.
- A patch needs to be installed -