Home » Checkers » How to install the assembly on Minecraft and how to use it. We launch Minecraft builds from Twitch, Curse launcher on a pirated site. Why won't the Minecraft build install?

How to install the assembly on Minecraft and how to use it. We launch Minecraft builds from Twitch, Curse launcher on a pirated site. Why won't the Minecraft build install?

We launch Minecraft builds from Twitch, Curse launcher on a pirate. In this way you can play a pirate in Agrarian Skies 2, Infinity Evolved Expert, GT New Horizons, Infitech and many other builds available in the launcher. In short, we take the assembly from the Twitch launcher and transfer it to the pirated MultiMc launcher.

If we do not have the launcher installed, we take it from here:

If necessary, we go inside free registration. Curse.com or Twtich.tv accounts are suitable for login

We enable support for Minecraft. Click on the gear, then select Minecraft from the menu.

Now we are looking for the modpack we need here:

For example Infinity Evolved:

Now open the folder with the assembly.

Now let's go for the pirate launcher on hackphoenix.com, my favorite is MultiMC:

Let's unpack it. (If you need a 7z archiver, we take it)

And we launch.

Select the Java version. Usually just Java works. Make sure that you have the x64 bit version, otherwise there will be problems with most assemblies.

If necessary, get x64 Java here:

Create an account:

We use any nickname and any password. Don't forget the password, we will have to enter it again. Something like 123 will work just fine.

Now we create a new instance (assembly). Give it a name and select a version. The version needs to be checked in the Twitch launcher, for example Infinity Evolved is Minecraft 1.7.10.

We are waiting for the download of pure Minecraft.

Now install Forge. Usually we need latest version from those available. In the case of Inifinity Evolved it is 1614.

Now we check that Minecraft itself and Forge are installed correctly, we start the assembly via offline mode. In fact, there is no difference between the play and play offline buttons for pirates.

If everything is done correctly, the main menu of the game will open and in the lower left corner you will see that the forge has been installed.

We close the game.

Now open the assembly folder in MultiMC.

Go to the Minecraft folder.

And now we transfer everything from the Twitch launcher folder to the MultiMC launcher folder with replacement.

Usually the following folders are enough for assemblies: mods, config, scripts, but if you are not sure, it is better to transfer everything, then there will definitely not be any problems.

Now we allocate more memory to Java so that the assembly does not slow down. To do this, open the build settings.

And set the amount of memory. It is ideal to give the assembly 4GB of memory if you have 8GB or more on your computer. It is not advisable to allocate more than 4GB, with the exception of a heavy texture pack and obvious game lags with 4GB. The more memory allocated, the slower Java actually works.

If necessary, we correct the screen resolution at startup. Specify the dimensions in pixels or check the box so that the game will fill the entire screen at once.

And now we are finally launching the game via play offline.

If everything is done correctly, the assembly will take much longer to load than during the first check.

That's basically all. Infinity Evolved launched via a pirated launcher. In the same way, you can launch Agrarian Skies, Infitech, GT New Horizons and any other build from the Twitch (Curse) launcher.

Minecraft is one of the most popular and successful games today. Millions of people play it, with new users joining every day. Here you do not have any specific tasks or goals, storyline or quests. There is only one important question before you: “How to survive?” This is what you will be solving throughout the game, and if you do well, then you can get creative - arrange your home, build decorative structures, experiment with mechanisms. All this can be done using a pure game client. But many gamers are wondering how to install the assembly on Minecraft. And new players immediately have a problem. They don't understand what kind of assembly this is. It is best to understand this issue gradually.

Modifications for Minecraft

If you hear a question about how to install an assembly on Minecraft, then most likely we are talking about an assembly of mods, which will allow you to get much more pleasure from the process. Mods are special additions written by the developers themselves or by fans who add certain functions, items, materials, recipes, and so on to Minecraft. Naturally, the game itself has enough freedom for creativity, but there is no limit to perfection, and modifications allow you to diversify your client with a variety of innovations.

With the help of mods you can fly to the moon, create incredible mechanisms, equip your house with beautiful furniture, get a car and much more. Therefore, you should not neglect them, just keep in mind that in multi-user mode on some servers you cannot use modifications, and if you can, then only those that are determined by the administration. But this does not answer the question of how to install the assembly on Minecraft.

Assemblies of mods for Minecraft

As you understand, modifications are released by different people, uploaded to different resources, and they need to be searched for, downloaded separately, installed, and checked. This is all not very convenient, and that is why players very often ask the question of how to install the assembly on Minecraft, because it is much more practical. One assembly can contain all the useful mods, tested and working, which you will not need to download individually into the client.

You yourself can select the modifications that will be contained in the assembly, after which only one download - and it’s on your computer. You have the opportunity to download the assembly for Minecraft 1.5.2 and other versions, but there are also universal ones that can be installed on any version of the game.

Placement on a computer

Another popular question that is asked regarding mod assemblies is: “How to install the assembly on Minecraft?” Where should I put it? If you are playing this game, then you should remember that almost all the manipulations that you perform with the client without entering the game are carried out in the .minecraft folder. If you have already installed any assembly, then do not forget to remove it. Of course, you will have the opportunity to select one of the assemblies at startup, but it is much more convenient to use just one, since the presence of several can lead to certain malfunctions. Try to minimize all third-party content that you attach to your client.

Assembly installation

When you have already downloaded the assembly you need, unpacked it into the game folder, it’s time to launch it. You will have to create a new profile, to which a specific set of mods will already be applied. You can select it in the versions window - there you are asked to decide on the one you want to play. Let's say you have client 1.5.2 installed, but you will be offered both this option and all those that came before it. And after adding your assembly to the folder, it will appear in the list. Choose it and then launch the game - now you will have a lot of fun, since a lot of new and interesting things will appear in Minecraft. You will look at this game completely differently, and fresh recipes and items, studying and using them will take you more than one hour.

Creating your own assembly

What other people do can be easily borrowed and used. But it’s much more pleasant to do something yourself and then enjoy the result of your own work. To do this, you need to learn how to make an assembly on Minecraft with your own hands. It's actually quite simple, since most of the work has already been done for you anyway. There are several platforms for installing mods on them, the most popular of which is Forge. You can download it, you can choose another one, for example ModLoader, it doesn’t matter. After installing it, you will find another Mods folder in your game folder, in which you need to write down all the modifications that you would like to see in the assembly.

I have a Jenkins pipe working called "TestPipeline". I want to run a build on two different slaves, which are designated as "tester1" and "tester2". And the pipeline script here is quite simple:

Node("tester1") ( build "test_job" ) node("tester2") ( build "test_job" )

However, when I run the TestPipeline job, "test_job" will not execute on the nodes that I have assigned. But instead execute on a random node. P>

I'm wondering if I should set "Restrict where this project can be run" on my "test_job". So I set it to "tester" (the "tester" label contains both "tester1" and "tester2" nodes). But when I run the pipeline job again, "test_job" is run twice on "tester2". I should expect the job to start first on "tester1" and then run on "tester2". Why is this? Is it because the "node" step doesn't matter when it comes to which node the build step should build on?

Asked by Andy Wang 07/07/2016 at 10:37

3 answers

See here. The solution is as follows.

In the test_job configuration, select "This assembly is parameterized" and add the "Shortcut" parameter and set the parameter name to "node"
In the pipeline script, use the code:

build job: "test_job", parameters: [[$class: "LabelParameterValue", name: "node", label: "tester1"]] build job: "test_job", parameters: [[$class: "LabelParameterValue", name : "node", label: "tester2"]]

And the work will be built the way I wanted.

However, I think this is just a workaround. I still believe this is a mistake. Because the node step should do its job and not let other plugins do it.

Answered by Andy Wang on 07/13/2016 at 11:14 am

I did the same but using the Node parameter so I can directly use the node list job or run a pipeline (in the pipeline I use the Choice parameter to have a list of available nodes). So in my case:

Install the node and label parameters plugin
In the test_job configuration, select "This assembly is parameterized" and add a node parameter and set the parameter name to node_name
In the pipeline, add a Choice parameter, call it node , put the possible choices there, so that when you run the pipeline you can choose which node it should run on.

Code to insert into the pipeline script:

Build job: "my_job", parameters: [[$class: "NodeParameterValue", name: "node_name", labels: ["$node"], nodeEligibility: [$class: "AllNodeEligibility"]]]

Minecraft is one of the most popular today computer games. Its popularity is difficult to explain; it was created in a primitive style and developed in a week, but for some reason the toy received unprecedented popular love.

Minecraft supports the installation of a lot of mods “on top” of the game, allowing you to expand the functionality, and in this article we will figure out how to install a collection of Minecraft mods on a PC.

Why are mods needed?

Minecraft mods, as we have already mentioned, expand the functionality of the game. One mod can provide new armor your character, the second - spaceship with additional resources, and the third will add the ability to build a whole series of new buildings. Of course, newcomers to Minecraft will not be bored even without mods, but after a while any player will want to expand the possibilities and add new interest to the game. This is where the need to install the mod arises.

Download the mod

Of course, before installing the mod, you need to download it. However, caution is required here - we must not forget that along with the mod you can download a virus that can harm not only your game, but also the security of your computer in general.

Here are some proven sites: minecraftforum.net, minecraft-mods.ru, minecraftmonster.ru, ru-minecraft.ru. On all these sites, fashion can be downloaded completely free of charge, but in some cases registration may be required.

Install on your computer

Using WinRar, open the minecraft.jar file - Computer/Local Disk/Users/AppDate/Roaming/.minecraft.
Go to the folder where the downloaded mod was saved and copy its contents into minecraft.jar.
Remove the META-INF folder from minecraft.jar.
Save the changes.
We launch the game - if everything is done correctly, the mod will work.

Installing the mod on the server

Installing the mod assembly on the server is also easy, just follow the instructions above exactly, but do not delete the META-INF folder. In addition, please note that the file on the server will not be called minecraft.jar, but minecraft_server.jar.

Building a computer is a fun activity. In addition, it saves the budget. It’s as if you hire yourself to assemble a computer and pay yourself 10–15 thousand rubles. (when assembling a gaming PC relative to the store price).

Assembling a computer yourself is not a tricky matter. The only tool you need is a Phillips screwdriver. But what to do next when all the parts are screwed into place? What to do after assembling the system unit? How to start the computer after assembly? How do you configure the BIOS to install Windows 7 on an SSD? How to install Windows after building a computer?

At first glance, there are a lot of questions and you can get confused from surprise. But the good news is that the days when only professionals could figure it out are long gone. Today, almost all of this work is automated. And if you follow a certain sequence of actions, then any person with a technical mind can figure it out.

Let's look at turning on a newly assembled computer for the first time using the example of a popular budget configuration for gaming (a gaming computer) and processing photos in RAW format (a computer for a photographer). The article will also be of interest to those who are looking for answers to the questions: “How to start a computer after replacing the motherboard?” or “How to start the computer after replacing the hard drive?” Since the BIOS is located on the motherboard, and Windows is installed on a hard drive or solid-state SSD.

So, we have a system based on the following components (which I assembled):

Processor INTEL Core i5 6500, LGA 1151 BOX;
Motherboard MSI H110M PRO-VD LGA 1151, mATX, Ret;
Operational Kingston memory HyperX FURY Black Series 16 GB;
SSD drive OCZ Trion 150 TRN150-25SAT3-240G 240GB, 2.5″, SATA III;
Hard drive 1 TB WD Caviar Blue;
DVD-RW optical drive LG GH24NSD0, internal, SATA, black, OEM.

The specified configuration is enough for processing photos (the built-in graphics core Intel HD Graphics 530 is used). In order for your computer to become a super gaming one, you need to add a video card to your wallet. The best option There will be a GeForce GTX 10 series. But the presence of a video card does not have any effect on the first time you turn on the computer.

We will install the operating system on an SSD solid-state drive, and we will allocate the hard drive for storing various files. Therefore, it is very important that the hard drive is disconnected from the motherboard when turning it on for the first time. Then the system itself will configure many parameters for working on a solid-state SSD. We will connect and tighten the hard drive later, using the already installed Windows. This is a standard procedure and does not cause any difficulties.

In general, turning on the computer for the first time after assembly consists of the following steps:

setting up BIOS and updating firmware (if necessary);
installation of the Operating System;
installing drivers for incoming components;
software installation.

So, the computer is assembled, let's move on to setting up the Bios.

Setting up BIOS msi h110m pro-vd UEFI for installing Windows 7

When you turn on the computer, the first thing you need to pay attention to is that the fans began to spin: on the processor and on the system unit case, the lights on the front panel blinked, and the monitor came to life. These are the first signs that everything is going as it should.

The appearance and location of the BIOS menu depends on the manufacturer of the system board (motherboard). In this case we are dealing with MSI UEFI. To get to this utility, you need to press the DELETE key on the keyboard when you turn on the computer.

If all wires and components are in place, you will see the first BIOS tab called SYSTEM STATUS. If there is nothing on the monitor, you need to check all connectors for reliable contact or look for a faulty component. You need to delve into the electronics of the system unit with the power turned off. In addition, the h110m pro-vd board has 3 LEDs that light up every time the system starts if there are problems with the processor, RAM and video cards.

System Status: Checking Detected Devices

Setting up Bios msi for installing Windows 7, as well as for Windows 8.1 or 10, begins with the fact that in the first line of SYSTEM LANGUAGE you need to select the Russian language. After which the interface will become Russian. Next, you can set the system date and time. But you can leave it as is, since the first time you access the Internet, the computer itself will set the correct date and time. Below you need to check that the computer has seen all your SATA devices. In this case, you can see two connected devices (as it should be):

SATA port 1: solid state SSD drive: Toshiba-TR150;
SATA port 2: Absent (disconnected hard drive);
SATA port 3: DVD drive: HL-DT-ST DVD-RA ATAPI;
SATA port 4: Absent (free connector).

For the first time, my optical drive was not on the list. I turned off the computer and checked the drive connector - it was not fully inserted. Having pushed the connector another 3-4 mm until it stops, I turned on the computer again. Now the optical drive was in its place.

There are 16384 MB in the PHYSICAL MEMORY line, which means all the memory has been identified. In the MEMORY SPEED line it is 2133 MHz - the memory operates at the declared frequency.

Nothing else particularly interests us here. Then you can walk through all the tabs to see what is there. Find the screen with processor temperatures. It is important that the temperature is within normal limits. For i5-6500, the maximum temperature is 71 °C. This is under load. And during idle time it’s somewhere around 30-40°C. Otherwise, suddenly you have poor contact between the processor and the fan. Then you will need to check the quality of the processor cooler installation.

Let's move on to the second tab ADDITIONAL. Select BUILT-IN PERIPHERAL DEVICES there and make sure that the SATA mode line is set to . This setting is needed when installing Windows on a solid-state SSD drive.

Checking whether AHCI mode is enabled when installing Windows on an SSD

In the same ADDITIONAL tab, in the WINDOWS OS CONFIGURATION window, switch WINDOWS 7 INSTALLATION to ENABLED. If you install Windows 8.1 or 10, select the item of the same name on this screen.

Selecting the installation option for Windows 7 or 8.1 (10)

Let's move on to the 6th loading tab (BOOT). Everything in the picture is written in English because it was chosen English language on the 1st tab, I did this on purpose to show what the English version of the Bios interface looks like. Here it is important to set the boot queue options, that is, in what sequence the devices will be polled for the presence of boot files. This is the bios setting for installing windows 7 (8 or 10) either from a disk, or from a flash drive, or from usb. I put classic scheme: First the DVD drive is checked, then the solid state SSD drive. We will be installing Windows 7 from a DVD, so the built-in DVD drive is first in line. After installing Windows, we will remove the installation disk from the drive. The computer will check the DVD drive, find no boot files there, and move on to the second device: a solid-state drive on which Windows will already be installed, so the operating system will boot. With this scheme, you don’t even need to disable booting from DVD in BIOS after installing the OS. Everything will work just like that.

If your OS will be installed from a flash drive or from an external DVD drive connected via USB, then first in the boot queue you need to select the corresponding USB device, instead of the built-in DVD drive.

Setting up bios to install windows 7 from disk

Next, go to the last tab SAVE&EXIT, save the settings and exit the Bios. But before you exit the BIOS, you need to open the DVD drive and insert the Windows 7 installation disc into the drive, since we cannot do this with the computer turned off, and we need the disc to get into the drive before the next time the computer is turned on. It is not necessary to retract the drive, since after turning on the computer it will retract itself.

Now you are ready to install Windows 7 on your computer. Read about how to do this in the next one, assembled with your own hands.